Driver reviewing a vehicle inspection report on a tablet beside a parked tractor-trailer at the start of the day

What Is a DVIR? Requirements, Who Completes It and When (2026)

What is a DVIR? A DVIR, short for driver vehicle inspection report, is the written record a commercial motor vehicle driver prepares at the end of each day's work when a defect is found or reported. It lists any defect that would affect safe operation or cause a breakdown. Under 49 CFR 396.11, most US carriers must require one. The driver signs it, the carrier certifies the repair, the next driver acknowledges it, and the carrier keeps it for three months. It can be paper or electronic.

Key Takeaways: The DVIR in Plain Words

  • DVIR means driver vehicle inspection report. It is a defect report tied to one vehicle and signed by the driver. It is not a maintenance record.
  • It is mandatory for most carriers, with three named exceptions: private motor carriers of passengers (nonbusiness), driveaway-towaway operations, and carriers that operate only one commercial motor vehicle.
  • No defect, no required report. FMCSA dropped the no-defect report for property carriers in 2014 and for passenger carriers in 2020. The duty to be satisfied the vehicle is safe stayed.
  • The report is half the rule. Safety-affecting defects must be repaired and certified, and the next driver must sign, before the vehicle runs again.
  • Electronic DVIRs are explicitly allowed. A March 2026 rule change wrote that into the regulation.

What Is a DVIR?

Ask five dispatchers what a DVIR is and you will get five answers. The pre-trip form, the post-trip form, the clipboard in the door pocket, the thing the auditor asks for, the thing the mechanic signs. Each answer is partly right.

The federal rule, 49 CFR 396.11, is specific. The report must identify the vehicle and list any defect or deficiency discovered by or reported to the driver that would affect safe operation or result in a mechanical breakdown. The driver signs it. If the carrier gets a report with a safety-affecting defect, it must fix the defect, and certify the fix, before the vehicle is operated again.

Three details matter. A DVIR belongs to a vehicle, so a driver who operates two trucks in one day prepares a report for each. It covers defects discovered by or reported to the driver, so a problem a colleague mentioned counts. And its purpose is to start a repair, which makes it a handoff between driver, carrier and the next driver.

Truck driver in a safety vest filling in an end-of-day vehicle inspection report on a tablet beside a parked tractor
A DVIR is prepared at the end of the day's work, for each vehicle operated.

This article is the foundation. For the signature sequence in depth, see our guide to the three-signature cycle under FMCSA Rule 396.11.

The DVIR is a federal safety regulation, not an industry custom. FMCSA issues it under the Motor Carrier Safety Act of 1984, which lets the agency prescribe recordkeeping and reporting requirements (49 U.S.C. 31133(a)(8) and (10)). Four sections do most of the work:

  • 49 CFR 396.11: the report, its contents, repair certification, retention, exceptions and electronic format.
  • 49 CFR 396.13: what the driver does before driving, including reviewing and signing the last report.
  • 49 CFR 392.7: no one may drive a commercial motor vehicle unless satisfied that eleven listed parts are in good working order.
  • 49 CFR 390.32: the conditions for electronic records and signatures.

Part 396 covers every motor carrier and the people who inspect or maintain its commercial motor vehicles. It excludes covered farm vehicles and pipeline welding trucks (49 CFR 396.1). The federal definition of a commercial motor vehicle in 49 CFR 390.5T centers on interstate commerce: 10,001 pounds or more, passenger thresholds, or placarded hazardous materials. Intrastate operations fall under state rules, so check your state if you never cross a state line.

Is a DVIR Mandatory? Who Has to Complete One

Short answer: yes, for most motor carriers operating commercial motor vehicles in interstate commerce. Every carrier must require its drivers to report, and every driver must prepare a report, at the completion of each day's work on each vehicle operated. The exceptions are narrow and listed in 396.11(a)(5).

Who must prepare DVIRs under 49 CFR 396.11 (current text)
Operation Daily DVIR duty Basis in the text
Property carrier, for-hire or private Yes, when a defect is found or reported 396.11(a)(1) and (a)(2)
Passenger carrier, for-hire or private business Yes, when a defect is found or reported Same rule; no-defect report removed in 2020
Private motor carrier of passengers (nonbusiness) No Exception, 396.11(a)(5)
Driveaway-towaway operation No Exception, 396.11(a)(5)
Carrier operating only one CMV No, under 396.11 Exception, 396.11(a)(5)
Covered farm vehicles; pipeline welding trucks No Outside Part 396, 396.1(c) and (d)

Two cautions. The one-vehicle exception removes the 396.11 report, not every inspection duty. Sections 396.13 and 392.7 are separate, and the exception refers only to “the rules in this section.” It also depends on how many CMVs the carrier operates, so a small fleet that adds a second truck loses it. Our article on leased and rented commercial vehicles covers who owns the DVIR when equipment changes hands.

Intermodal equipment is handled separately. Drivers do not prepare the 396.11(a) report for intermodal equipment tendered by an intermodal equipment provider, and report its defects to the provider under 396.11(b).

Short-haul operations are not on the exception list. The 150 air-mile rules concern hours of service, so a local fleet still has DVIR duties. We explain the difference in the 150 air-mile short-haul exemption and DVIRs.

When Is a DVIR Required? How the Rule Changed

Short answer: at the completion of each day's work, for each vehicle operated, if the driver discovered or was told about a defect or deficiency. Defects likely to affect safety must be repaired and certified before the vehicle is driven again.

Older training material often has this wrong, because FMCSA has amended the rule three times since 2014. The Federal Register notices give the sequence:

Three rule changes behind today's DVIR requirement
Effective Federal Register What changed
Dec. 18, 2014 79 FR 75437 No-defect DVIRs dropped for interstate drivers, except drivers of passenger-carrying CMVs
Sept. 17, 2020 85 FR 50787 Same relief extended to passenger-carrying CMV drivers
Mar. 23, 2026 91 FR 7893 Clarification: 396.11 and 396.13 say expressly that reports may be electronic under 390.32. No new duty

Passenger carriers are no longer a special case. When FMCSA finalized the 2026 rule, a commenter suggested restoring no-defect reports for passenger carriers because electronic reports are quick. FMCSA declined, saying there is no basis for that burden whether the report is electronic or not. It also confirmed that paper DVIRs stay acceptable.

“No defect, no report” does not mean drivers can stop looking. The duty to be satisfied the vehicle is safe sits in 392.7 and 396.13. The change removed paperwork for good days, not the inspection.

Pre-Trip vs. Post-Trip: Law vs. Company Practice

Short answer: the regulation text never uses the words “pre-trip” or “post-trip.” It requires a written report at the end of the day's work (396.11) and a driver check before driving (392.7 and 396.13). A written pre-trip form every morning is company practice.

Trainers teach “pre-trip” and “post-trip” as if they were legal terms. They are habits that map onto the rules. Knowing the mapping tells you which parts you can defend with a citation and which are your own policy.

Pre-trip and post-trip: what the regulation requires and what fleets commonly add
Item What the regulation requires Common company practice
Post-trip (end of day) Written report on each vehicle operated when a defect is found or reported, covering at least eleven parts and signed by the driver (396.11) Yard walk-around; report entered even when nothing is wrong
Pre-trip (before driving) Be satisfied the vehicle is safe, review the last DVIR if it listed defects, sign (392.7, 396.13) Documented inspection before every shift, often with a unit-specific checklist
Written pre-trip record No separate federal requirement Often required by carriers, insurers or customers
Procedure and duration Not prescribed Fleet checklists, photo prompts, minimum times
Driver crouching beside a tractor steer tire during a pre-trip walk-around inspection in a freight yard
The pre-trip walk-around satisfies the driver's duty; the DVIR is the written end-of-day record.

So, are post-trip inspections required by law? A written post-trip report is, on days a defect is found or reported. The regulation describes no separate post-trip procedure. In practice, a driver cannot report honestly on brakes, tires and lights without looking at them, so a quick end-of-day check is how drivers meet the rule. Our article on why drivers must do a pre-trip inspection covers the morning side.

This matters for your policy. If you require a written pre-trip form every day, that is a sound rule, but it is your standard. Make sure drivers know which parts are legal minimums and which are company rules.

What a DVIR Must Cover

Section 396.11(a)(1) says the report “shall cover at least” these eleven parts and accessories. The same list appears in 392.7, which is how the pre-trip and post-trip checks line up:

  1. Service brakes, including trailer brake connections
  2. Parking brake
  3. Steering mechanism
  4. Lighting devices and reflectors
  5. Tires
  6. Horn
  7. Windshield wipers
  8. Rear vision mirrors
  9. Coupling devices
  10. Wheels and rims
  11. Emergency equipment

“At least” is the key phrase. A reefer trailer has a refrigeration unit, a dump truck has a hoist, and a bus has passenger doors. None is on the federal list, but a defect in any of them can affect safe operation. Start from the eleven items and add what your equipment has, as we describe in customizing digital inspections for semi-trucks and construction equipment.

Each unit in a combination needs its own record. Drop-and-hook operations are where a defect most often lands on the wrong unit, a problem we cover in DVIRs for combination vehicles. On two-driver operations only one driver needs to sign, provided both agree on the defects.

Who Signs: The Three-Step Repair Loop

Short answer: three people sign across three steps. The driver reports, the carrier or its agent certifies the repair, and the next driver acknowledges the certification before driving.

  1. The driver reports and signs. At the end of the day's work, the driver lists any defect found or reported and signs (396.11(a)(2)).
  2. The carrier repairs and certifies. Before requiring or permitting anyone to operate the vehicle, the carrier or its agent must repair defects likely to affect safe operation. It then certifies on the report that the defect was repaired or that repair was unnecessary (396.11(a)(3)).
  3. The next driver reviews and signs. Before driving, the driver reviews the last report if it listed defects and signs to acknowledge the review and the certification (396.13(b) and (c)). The signature does not apply to defects on a towed unit that has left the combination.

Here is a hypothetical example. A driver writes up an inoperative trailer marker lamp at the end of a shift. The shop replaces it the next morning and signs the report as repaired. The next driver sees the certification, signs and rolls. The rule is a handoff, and auditors check whether the handoff left a trail.

Fleet mechanic in a shop bay confirming a completed repair on a tablet beside a commercial truck with its hood open
Step two: the carrier or its agent repairs the defect and certifies it on the report.

Teams skip the third step most often. The first signature happens because a defect is on someone's mind and the second because a mechanic must close the job. The third happens when a driver is in a hurry. It is one reason the same findings recur, as we show in the five most common DVIR violations.

How Long to Keep DVIRs

Short answer: three months from the date the written report was prepared.

Section 396.11(a)(4) requires the carrier to keep three things: the driver vehicle inspection report, the certification of repairs, and the certification of the driver's review. Fleets remember the first and forget the other two. A report without its repair certification looks incomplete to an auditor, even if the repair happened.

The clock starts on the date the report was prepared, so put a date on every form. Keeping records longer, for an insurer or customer, is your call. Canada's trip inspection standard sets a longer minimum, covered below.

Electronic DVIRs

Short answer: yes, a DVIR can be fully electronic. Sections 396.11(a)(6) and 396.13(d) say the reports may be created and maintained in electronic format in accordance with 49 CFR 390.32.

Electronic DVIRs were allowed before 2026 through the general rule in 390.32. The final rule effective March 23, 2026 wrote the language into 396.11 and 396.13 after a National Tank Truck Carriers comment. FMCSA said it would encourage cost-saving electronic methods and made no changes from its proposal.

Section 390.32 sets the conditions. Electronic documents and signatures must accurately reflect the required information, and any available technology that satisfies FMCSA's requirements can supply the signature. A record fails if it cannot be retained, is not used for its purpose, or cannot be reproduced on time for anyone entitled to see it. It also needs proof of consent under 15 U.S.C. 7001(c). In practice, you must be able to show a complete report with all three signatures and dates on request.

Paper DVIR versus electronic DVIR: where fleets notice the difference
Item Paper DVIR Electronic DVIR
Legal status Allowed Allowed under 390.32
Finding a report Depends on where the copy ended up Searchable by unit and date
Repair sign-off Tracked by hand Can be routed to the shop and next driver

To price the switch, use our paper vs. electronic DVIR cost calculator. For tool selection, see the pre-trip inspection and DVIR software guide. Our electronic DVIR software page shows how PTI4YOU handles inspections and sign-off on drivers' own phones.

Sample DVIR: The Fields on a Good Report

No federal form exists. Section 396.11 prescribes content, not layout. This table shows the common fields and where each comes from, so you can check a paper form or evaluate an app.

Sample DVIR fields and why each is on the form
Field Source Why it is there
Vehicle ID (unit, plate or VIN; each trailer separately) Required, 396.11(a)(2)(i) The report must identify the vehicle
Date and time prepared Implied by retention rule Retention runs from the date prepared
Driver name and signature Required, 396.11(a)(2)(ii) Shows who reported
Parts checked (eleven items plus your equipment) Minimum list, 396.11(a)(1) Shows the report covered what the rule requires
Defects found or reported Required, 396.11(a)(2)(i) Starts the repair cycle
Repair certification (repaired or unnecessary; who, when) Required, 396.11(a)(3)(ii) Closes the defect before the next trip
Next driver's acknowledgment Required, 396.13(c) Confirms review of the certification
Odometer, location, “no defects found” Not required by FMCSA; required on Canada's Standard 13 report One form works on both sides of the border
Notes or photos Company practice Helps the shop triage; harder to fake

DVIR vs. Roadside, Annual and Maintenance Records

Several inspection documents sound alike, and fleets mix them up. They have different owners and clocks.

  • DVIR (396.11): written by the driver each day for defects found or reported. Kept three months.
  • Driver Vehicle Examination Report (396.9): written by an inspector at the roadside. The carrier must certify corrections within 15 days and keep a copy for 12 months.
  • Periodic inspection (396.17): each commercial motor vehicle must pass an inspection at least once in the preceding 12 months, with documentation on the vehicle.
  • Maintenance records (396.3): the carrier's systematic inspection, repair and maintenance program for each vehicle.

A DVIR replaces none of these. A driver sees what is visible from the ground, and a mechanic finds what is not. Our article on PMI vs. DVIR explains how they should feed each other.

Canada: Circle Checks and NSC Standard 13

Short answer: Canada's equivalent is the daily trip inspection, or “circle check,” under National Safety Code (NSC) Standard 13. It is similar in purpose but asks for more on the report than the US DVIR does.

The Canadian Council of Motor Transport Administrators (CCMTA) publishes the NSC, and says all provinces and territories adopt its standards by reference or mirror them in their own law. Ontario's Ministry of Transportation describes the daily inspection as “also known as a circle check or a pre-trip inspection,” a Highway Traffic Act requirement performed under Schedule 1 of Ontario Regulation 199/07. This is how Standard 13 (revised March 2009) compares with the US rule:

US DVIR (49 CFR 396.11) compared with Canada's trip inspection (NSC Standard 13)
Topic United States Canada (Standard 13)
When Report at the completion of each day's work Inspection every 24 hours when operated (trucks, tractors and trailers over 4,500 kg registered weight; buses use their own schedules)
No-defect days No report required Report records that no defects were found
Report contents Vehicle, defects, driver signature Plate or unit number, carrier, date and time, location, signed statement, printed name, odometer (if equipped)
In the vehicle No carry requirement Driver carries the report and schedule; electronic copies permitted
Retention Three months At least six months; driver forwards original within 20 days

Standard 13 also splits defects into major and minor. A vehicle with a major defect cannot be operated. Provinces implement the standard in their own regulations, and the standard notes that some jurisdictions exempt certain vehicles, so confirm details with your provincial authority. Our Canadian NSC Standard 13 compliance guide covers cross-border fleets in depth.

Eight Common DVIR Mistakes

None of these is exotic. Together they turn a workable process into an audit headache.

  1. Treating “no report required” as “no inspection required.” The 392.7 and 396.13 duty remains.
  2. Collecting the driver's report and stopping. Without the carrier's repair certification, the record is half done.
  3. Skipping the next driver's acknowledgment. Section 396.13(c) requires it.
  4. Pencil-whipping. Pre-filled checklists tell an auditor nothing. See how digital DVIRs stop pencil whipping.
  5. Mixing up tractor and trailer records. A defect logged against the wrong unit never gets fixed on the right one.
  6. Assuming an exemption that is not there. Short-haul status, a small fleet or a leased truck does not remove the duty by itself. Read 396.11(a)(5).
  7. Using the DVIR as the maintenance program. Scheduled inspections and the annual inspection are separate duties.
  8. Losing records inside the window. If you cannot produce three months of reports, certifications and acknowledgments for a unit, you have a gap.

How to Run a DVIR Program in a Small Fleet

A small fleet needs a few decisions made once and a weekly habit. This sequence works on paper, in spreadsheets or in software.

Fleet manager at a desk reviewing open vehicle defect reports on a laptop, with trucks visible through the office window
A weekly review of open defects does more for compliance than any single form.
  1. Confirm your scope. Decide whether you run interstate or intrastate, whether a 396.11(a)(5) exception applies, and what your state adds. Write it down.
  2. Pick one checklist per vehicle type. Start from the eleven federal items, add your equipment, and keep it short enough that drivers complete it honestly.
  3. Define “safety-affecting.” Separate defects that take a unit out of service from those that can be scheduled. The rule puts the repair decision on the carrier, so name who makes the call.
  4. Name a certifier and a backup. Someone, whether an in-house mechanic or an outside shop, signs the repair certification. A unit with an open defect should not roll while that person is away.
  5. Train the handoff, not just the form. Walk drivers through all three steps with a real report.
  6. Review weekly. Look at open defects, repeat defects, drivers who file nothing, and certifications that are days old.
  7. Run a quarterly records drill. Pull three months of reports, certifications and acknowledgments for one unit. If that takes more than a few minutes, fix the filing.

Software makes the habits stick but is not required. Useful features map to the steps above: required fields, repair sign-off routed to whoever certifies, and an archive searchable by unit. For options, see our comparison of DVIR apps for small and medium fleets.

PTI4YOU turns a driver-reported defect into a work order, routes it to a mechanic for certification, and puts the certified report in front of the next driver. Photos, timestamps and GPS location are captured with the inspection. It runs on the phones your drivers already carry, is not an ELD and does not record hours of service. Our electronic DVIR software page shows the full cycle.

Frequently Asked Questions

What does DVIR stand for?

DVIR stands for driver vehicle inspection report. It is the written or electronic report a driver prepares at the end of each day's work, listing any defect that would affect safe operation or cause a breakdown. The governing rule is 49 CFR 396.11.

Is a DVIR mandatory?

Yes, for most US motor carriers under 49 CFR 396.11. The exceptions are private motor carriers of passengers (nonbusiness), driveaway-towaway operations and carriers operating only one commercial motor vehicle. Covered farm vehicles and pipeline welding trucks fall outside Part 396.

When is a DVIR required?

At the completion of each day's work, for each vehicle operated, when the driver found or was told about a defect or deficiency. The carrier must then repair and certify safety-related defects before the vehicle runs again, and the next driver must review and sign.

Are post-trip inspections required by law?

The end-of-day written report is required, but the words post-trip inspection do not appear in 396.11, and no report is needed on a day with no defects. Drivers must still be satisfied the vehicle is safe before driving under 49 CFR 392.7 and 396.13.

Do you need a DVIR if there are no defects?

No. Under 49 CFR 396.11(a)(2)(i), a driver does not have to prepare a report when no defect or deficiency was discovered by or reported to the driver. FMCSA removed the no-defect report for property carriers in 2014 and for passenger carriers in 2020. The driver must still be satisfied the vehicle is safe before driving.

What is the difference between a pre-trip and a post-trip inspection?

A pre-trip inspection happens before driving and covers the driver's duty to confirm the vehicle is safe and to review the last DVIR. A post-trip inspection happens at the end of the day and feeds the written DVIR. A written pre-trip form is company policy, not a federal requirement.

How long must a DVIR be kept?

Three months from the date the written report was prepared. The carrier keeps three records: the report, the certification of repairs and the certification of the driver's review. Canada's NSC Standard 13 sets a longer minimum of six months for the original report and the certification of repairs.

Can a DVIR be completed electronically?

Yes. Sections 396.11(a)(6) and 396.13(d) allow electronic reports under 49 CFR 390.32, and the FMCSA rule effective March 23, 2026 made that explicit. Paper is still allowed. Electronic records must be accurate, retained, reproducible on request and include proof of consent.

Is a DVIR the same as a circle check in Canada?

They overlap but differ. The circle check is the Canadian daily trip inspection under NSC Standard 13, required every 24 hours of operation, with a signed report carried in the vehicle. The US DVIR is an end-of-day defect report under 49 CFR 396.11. Cross-border fleets should meet both.

Conclusion: A Simple Rule That Rewards Discipline

A DVIR looks like a form but works like a handoff. The driver says what is wrong, the carrier fixes it and says so, and the next driver confirms before rolling. The eleven parts, the three-month retention and the electronic option all support that loop.

Try one test this week. Pick any truck and time how long it takes to pull three months of reports, repair certifications and acknowledgments. If it takes minutes, your program works. If you would need to ask around, you know where to start. This article is general information, so confirm how the rules apply to you with your compliance advisor or your state or provincial authority.

Run Your DVIR Cycle From One App

Start a 15-day free trial, add a few units and run one report through the full cycle: driver report, mechanic certification and next-driver review.

Start Your Free Trial

Zero setup fees. Zero hardware. Works with the phones your drivers already carry.

Closed-Loop Repair Sign-Off Photo, Timestamp and GPS Evidence US & Canada Ready

Official Sources and Further Reading

How we checked this: we compared each US rule statement with the current eCFR text of the cited sections (396.11 and 396.13 are current as amended by 91 FR 7893, effective March 23, 2026) and the Federal Register notices, and each Canadian statement with the CCMTA Standard 13 text (March 2009 version) and Ontario sources, on November 14, 2026. Rules change and vary by jurisdiction, so confirm details with your own advisor or regulator. This is general information, not legal advice.